PowerFlex Fence Project :: Day Two

Tuesday was a nice day. It was partly cloudy with a breeze that kept things cool for all of the work. Tuesday night into Wednesday it stormed and stormed, but when we woke up yesterday morning the sun was shining and except for all the mud it was another great day to work. So, with the weather in our favor we started early and got quite a bit of work done. If you were out on the farm working with us today you probably would have heard me say things like this:

• "Ahh, my boots are stuck in the clay/mud/goop!"
• "I am ready to be done with the wood posts and move on to the rest of the fence."
• "There is no way I could have every got this done without the help of you (talking to Gary Duncan of PowerFlex)."
• "I cannot believe how light weight these posts are."
• "There is no way I could pull one of these out of the ground."
• "I've put a few different kinds of posts up on this farm in the past year, but by far I like putting this one in the best (in reference to the PowerFlex posts)."
• "Check this out, I'm carrying the post driver and five posts with no problem. No way I could do that with steel posts."
• "You know, I think even I can figure out how to do this (in reference to putting up the fence myself)."
• "That is so cool, but I can't do it (me talking about how Mr. Duncan breaks off the wire with a clean break)."

That is just a small sampling of the positive things I had to say about our new Hi-Tensile fence and PowerFlex posts. I really can't believe how cool the process is of putting up this fence and strength (and looks) of the posts. One really cool thing about the PowerFlex posts is how easy it is drive them into the ground. Granted, the ground was soft after the rain, but we drove them in so quickly with just a regular post driver. If the ground is more solid you can just pound a pilot hole and then pound in your PowerFlex post. Let's just put it this way, in about thirty minutes time we put in about 70 posts!

Another thing that I found really exciting is how easy it is to attach the wire to the posts. We made a guide to place the holes at the correct spacing on the posts and then just used a cordless drill and a 7/32's bit to drill through in no time. Now we have one section of fence along the road completely done. I can't tell you how great that is and how amazing it looks!

Today we are back at it again and I think we will finish up the rest of the fence along the road. After that I will move onto the three-wire fence along the inside of the trees. I have set that up with a couple of gate openings so that I can get back there with a tractor to cut wood and also so we can flash graze the cattle in the woods and along the edges. Make sure you check back tomorrow to see what we get done!

Also, if you are in the area today, feel free to drop on by to see the process and talk to Mr. Duncan.

You're Invited . . .

We are opening our farm up today to anyone interested in PowerFlex fencing. Mr. Duncan is using a variety of products on our farm to show different options available with their products. He will also be here to answer any questions about their fencing system. So if you are wanting to learn more about this type of fence, drop us an e-mail and we'll send you directions to our farm.

PowerFlex Fence Project :: Day One

We have started! I can't tell you how great it is to actually say those words and see the progress as we get work done. Gary Duncan showed up yesterday morning with a truck load of materials and the know-how to get this fence going! Shortly after that my Uncle Loren pulled in with a tractor (my cousin Verne had also brought a tractor and post-hole digger Monday), a mower, and a bunch of tools. Before I knew it corner posts and wood transition posts were going in the ground and by the end of the evening we even had our first PowerFlex posts up on the perimeter.

In the picture above you can see Mr. Duncan teaching me how to tie a wire knot. Let me just tell you that it is one cool little trick. This is the process that he uses to tie the insulators to the wood posts and to tie the line wire to the insulator. In other places he used a crimp sleeve to make the loop. He is doing different things in different places so that I can get an idea of what is possible, but I have to say the wire knots seem the best because you don't really need any tools. Check out this link to go to a little article that explains the process.

This picture shows what much of my day involved. We had to put in the corner posts and line posts in order to start stringing the wire so there was a lot of digging to do. As you can see the John Deere 4020 and post hole digger came in handy. But, there was still some hand digging to do in order to get the posts deep enough. We are pretty much done with the perimeter posts, but there are a couple brace posts that need to go in yet. Today we are going to be focusing on putting in the posts along the woods. This will be a three wire fence so our bracing won't need to be as stout, but Mr. Duncan also pointed out that we could easily add a floating brace in the future if we needed to ... you can read about floating braces on the PowerFlex page at this link.

Finally, as I mentioned we even have the PowerFlex posts up on the first stretch of fence. In this picture you can see Mr. Duncan pounding in a post with a regular steel post driver. If you look really closely in the picture (you can click on it to enlarge it) you can see a blue thing sticking out of the ground just past the wood post in the picture. This is a tool that he used to make a pilot hole and then would pound in the post. He said we could just pound the posts in without the pilot hole, but he liked to do it this way because it helped get them in the ground straight.

Of course, chime in with any questions you have about the process and I'll make sure to take some time to answer (after asking Mr. Duncan of course!). Check back tomorrow for another update!

The Fence Begins...

If you have been following for the past five days or so you know that the fence work is set to begin today and you have also had a chance to read up on the type of fence we are doing and the posts that we are using. Today is the day we begin putting it all together and as luck would have it it is also the day that it has decided to rain and have storm chances! But, I'm going to press on as much as possible and complete all that I we can so that we can get this fence up. Keep checking back each day for pictures of the progress.

In a somewhat related note the shed is going up again (except that we might get rained out today) and I'm guessing they have about one days worth of work left. They are only putting up the roof and the framing so it doesn't take as long ... the steel on the sides will be another project for us...